A one-inch absorption panel system was designed for the room and custom trim and room design allowed for stock size panels to be used with minimum custom cuts, allowing for a room to get some treatment in a budget that would normally afford none.īoth the equipment rack and the projector are concealed in a storage room at the back of the theater. Some degree of wall treatment was required but the budget would not allow for a typical snap-track track installation or acoustical analysis. The CT speaker system and subwoofers were concealed with a false front wall and concealed behind acoustically transparent cloth. CT7 15” subwoofers with matched amplifier were selected to bring a level of bass response to the room that the client had not experienced in his primary residence. The speaker system was to be a Bowers & Wilkins CT7 system for the main speakers and use CI600 series for surround and Atmos speakers. Unlike the client’s 7.1 theater at his primary residence, the hunting lodge theater was to be a Dolby Atmos 7.1.2 system. These smart TVs and the projection system video are managed through a Control4 touchscreen and video routing is achieved through an Atlona 4K HDMI switching system. For an absolutely unrivaled listening experience youd expect from a dedicated home theater or media room, acoustic treatments.
The smaller displays are comprised of a 75” Samsung 4K smart TV flanked by two 50” Samsung 4K displays on each side for a total of 5 possible independent video programs.
To achieve the homeowner’s requirement to switch between one large video program and five smaller displays for sports viewing.
#MEDIA ROOM ACOUSTIC PANELS 1080P#
The projection system is an Epson 1080p projector on a Stewart Cima motorized screen. The theater scope included both a projection system and a multi-TV video wall.
0 kommentar(er)
